Wednesday 29 October 2014

Homemade Stained Glass

We were thinking about doing a wine glass holder above the bar and wanted some stained glass in it, but that stuff isn't cheap. I was in the dollar store and found this glass stain stuff by decoart. It was perfect!
I had a piece of frosted and tempered glassfrom an old shelf so i scribbled Lances last name on it (because one day that'll be my last name too, dammit!) Then i went over it with the"black leading"glass stain. This stuff allows you to create whatever design you want. It's fairly tricky to use if you're not steady handed but this is my practice piece as I have two of these pieces of glad kicking around.
Once you outline your design, let it dry for 24 hours and try to resist poking at it like I did.
Once it's dry you can use whatever glass stain colors you like. It was a lot of fun to make and I can't wait to start on the real one that we'll use in the bar!






"Craftiest" Advent Calender, EVER!


Every year I buy everyone in the family a chocolate Advent calendar for December, and every year Lance opens his window and tosses the crappy piece of chocolate into a bowl which will remain there for the entire month of December and into January when I put the decorations away and either toss the chocolates out or one of the kids eats them. I had to come up with an idea to get him enjoying this whole "lead up to Christmas" thing, and what does a man like more than anything? Beer! Especially with all the crazy craft beers that they're making now. I started saving up Pringles cans. I'd seen a pin. It looked simple enough. By mid-October I had almost 20 cans saved up and had even gotten as far as decorating one with Mod Podge (and it looked pretty cool), then I went to the liquor store.  I had a plan... Decorate a can, buy a beer for it, then by the time all 24 were decorated, I`d have all the beers that I needed and could figure out how to make them stick together.  Here`s where it all went wrong.  The craft beers were way too big for the Pringles cans, and the beers that did fit were boring!  Back to the drawing board!!!

I figured that I`d make them out of PVC pipe, so my daughter and I trecked off to Home Depot where we found a 10ft pipe that was 3" wide for about $14.  Basically I'd need two and half of those and then I'd have to decorate them which would probably end up costing about $40+ to do it that way.  I had almost given up, then at the dollar store, we spied a wine cylinder!  Ermahgerd!!!  I grabbed 25 of these beauties for $30 and the best part... I wouldn't have to decorate them much!  They also had a numerical wall border with numbers 1-25 that looked like it would be the perfect size for my days, and I was right!

I came home and got to work.
Organizing my pretty boxes into colors!
 I am making a 25 day Advent Calendar instead of the traditional 24 day as it seemed more logical (and easier) to create 5 rows of 5 and to let Lance have a nice special beer on Christmas Day.  Hopefully I find a really neat Christmassy one like "Santa's Butt Beer" or something.  
The first row, done!
I took the strings out of the lids and put them aside (I used them later) as it would have looked silly with strings all over the place.  I then started gluing them to each other.  I found it best to remove the lids, then glue them to the next one in the "upside down" position as some cylinders were a smidge taller than others, and I didn't want the front looking all uneven.  This way, the uneven part would be at the back and no one would ever see that part!  
See how beautifully uniform the front is?
After I had stacked and hotglued all 25, it was time to fiddle around with the lids.  See how perfect that wall banner was?  I cut the circles out and they fit easily into the lip of the lid.  I just had to slide them in and wiggle them about a bit to make them fit perfectly.  I didn't even have to use glue! 
Cutting out circles when I 'm supposed to be working!

See how they just kind of slide into the lip neatly?

All stacked, and waiting to get numbered!

Finding fun beers is fun!
I wrapped each beer up in red or green tissue and used the strings from the boxes to secure them, then I popped one into each box and put the lid on.  I haven't quite bought all 25 beers yet because I'm waiting for the Christmas Crafts to make it to the stores so I can buy the elusive "Ugly Sweater" beer and hopefully "Santa's Butt".  Next year I think I'll buy 6-ish per season so he has a nice mixture of Summer/Spring/Fall/Winter beers to open, but I know he'll enjoy whatever it is I put in there.  Note the ACDC beer?  Neat! 
Here it is in all it's finished glory!  I used some colored laser tape that I found at the dollar store to decorate it.
Roll on December 1st.  I don't know who'll be more excited to open the calendar.  Lance or myself!  Needless to say, this is more personal than the Craft Calendars that they sell at the Liquor Store as I get to pick and choose what beer goes into it, and 650ml > 355ml.  ;)

Friday 12 September 2014

It's Been A While!

I've been secretly crafting away in my "Secret Project Room", making millions of things for my wedding.  My latest was some bunting for our engagement photoshoot that's coming up next month.  I didn't quite know how I was going to make this, and was originally thinking of cardstock because the local scrapbooking store lets you use their die-cutting machine if you purchase the paper there.  Score!  But I wanted something that was going to last longer so I went to the fabric store and dug around in the discount bins until I found some off-white fabric for $5.

I spent the evening cutting out triangles but wasn't completely happy with them.  The fabric seemed to stretch and fray and it just didn't look perfect enough!  I had bought some felt from the dollar store which I was going to do my numbers with, then I thought "Why don't I use the excess to make the triangles?"  Ding, ding, ding... We have a winner!!!

It took a bit of sitting in the sun and cutting, but felt is pretty forgiving, and so was the sun.  I quite enjoyed myself.  I wasn't sure how to attach the felt to the felt and had read that there is a special felt glue.  I am not one for using the right material for the right job (mostly), so I used my Mod Podge.  It worked perfectly!  I didn't put it on too thick as I'd read that the glue seeps through, and I put weights on each piece after I'd glued it...Those numbers are stuck!

Here's the finished project, all sewed up on some white crosgrain ribbon and hanging in my secret project room.  I noticed that the "6" is a little wonky after it was all done, but that's ok.  It still all turned out better than I'd expected in the first place, and it's going to last forever!!!


If I had to do something like this again (and I totally would!), I would do a few things differently.  I would buy some freezer paper to make the letter/number templates with, then iron them to the fabric before cutting.  It was still fairly easy to freehand them, but imagine the awesome fonts you could use with a template!!!  I would also leave no spaces between each flag as it ends up being pretty long.  My daughter also thinks that I should have used black ribbon instead of white, but I kind of like the white.  

I'm thinking about making a "Thank You" banner to use during our Wedding Photoshoot, then we can send that picture out as thank you cards after the wedding!  Stay tuned!